On/Off - aquatermic inverter Manual Del Usuario

Operation Instructions
Note:
it includes the "Sanitize mode", "Quiet" mode, "Auto" mode, "Floor debug" mode, "Emergen.
mode", "Holiday mode", "Forced Cooling" mode, "Forced Heating" mode, and "Debug" mode.
2. Operation Instructions

2.1 On/Off

It is intended to turn on/off the unit.
[Operation Instructions]
At the homepage, by pressing the ON/OFF key
When the unit is ON, the green indicating LED
light on. When the unit is OFF, the green indicating LED
[Notes]
① The unit is defaulted to be OFF when energized for the first time.
② The ON/OFF key operation works only at the home page and the standby page.
③ When the "Holiday mode" or the "Emergen.mode" is activated, the ON/OFF key
operation will become ineffective.
④ When the "Forced Heating" or "Forced Cooling" is activated, it will be deactivated by
pressing the "ON/OFF" key
⑤ ON/OFF operation will be memorized by setting "Memory" to be "On" at the "GEN." setting
page. That is, in case of power failure the unit will resume running upon power recovery. Once "On/
off Memory" is set to be "Off", in case of power failure the unit will keep "Off" upon power recovery.
⑥ At the home page, the ON/OFF key
Function keys no.1 to no.4 are corresponding to "FUNC.", "PAPA", "VIEW" and "GEN." setting pages
respectively.
⑦ At the standby page, the Menu key
is used to turn on/off the unit if applicable, and all other key operations are ineffective.
⑧ The control will return automatically to the homepage where there is no any key operation in
10 consecutive minutes.
, and then press the ON/OFF key
is intended to turn on/off the unit if applicable. The
is used to back to the homepage, the ON/OFF key
3
, the unit will be turned on/off.
located at the upper right of the control will
will light off.
again to start the unit.