Intended Use - Snapper ESXDST82 Manual Del Usuario

EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
Your trimmer has been engineered and
manufactured to a high standard for
dependability, ease of operation, and operator
safety. When properly cared for, it will give you
years of rugged, trouble-free performance.

INTENDED USE

This product is only intended for use outdoors.
This product is designed for cutting grass, light
weeds, and other similar vegetation at or about
ground level. The cutting plane should be
approximately parallel to the ground surface.
The product should not be used to cut or trim
hedges, bushes or other vegetation where the
cutting plane is not parallel to the ground surface.
GENERAL SAFETY wARNINGS
Read all safety
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instruction for
future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
TRAINING
„ Read the instructions carefully. Be familiar
with the controls and the correct use of the
machine.
„ Never allow children or people unfamiliar
with these instructions to use the machine.
Local regulations can restrict the age of the
operator.
„ Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to other people or their property.
English (original instructions)
wARNING
warnings and
PREPARATIoN
„ Before use, check the battery pack for
signs of damage or aging. If the battery
becomes damaged during use, switch
off the appliance and remove the battery
immediately. Do not use the appliance if
the battery is damaged or worn.
„ Before
the machine for damaged, missing or
misplaced guards or shields.
„ Never operate the machine while people,
especially children, or pets are nearby.
oPERATIoN
„ Keep power cords away from cutting
means.
„ Wear eye protection and stout shoes at all
times while operating the machine.
„ Avoid using the machine in bad weather
conditions especially when there is a risk
all
of lightning.
„ Use the machine only in daylight or good
artificial light.
„ Never operate the machine with damaged
guards or shields or without guards or
shields in place.
„ Switch on the motor only when the hands
and feet are away from the cutting means.
„ Always disconnect the machine from the
power supply (i.e. remove the plug from
the mains, remove the disabling device or
removable battery)
• whenever the machine is left
unattended;
• before clearing a blockage;
• before checking, cleaning or working on
the machine;
• after striking a foreign object;
• whenever the machine starts vibrating
abnormally.
„ Take care against injury to feet and hands
from the cutting means.
„ Always ensure that the ventilation openings
are kept clear of debris.
1
use, always visually inspect