–
Clamp the damper in the bench vise.
Guideline
Use soft jaws.
–
Fill the damper up to about half of its capacity.
Shock absorber oil
501026-01
–
Lubricate O-ring
Lubricant (T158) (
–
Mount the piston rod carefully.
–
Mount original seal ring retainer
ring groove.
–
Mount lock ring
Info
Do not scratch the inside surface.
–
Pull out the piston rod until the seal ring retainer is flush
with the lock ring.
501027-01
–
Mount original locking cap
–
Bleed and fill the damper (see repair manual).
–
Fill the damper with nitrogen (see repair manual).
–
Mount original washer
–
Measure the total spring length while the spring is not
under tension.
–
Position spring
501003-01
–
Mount original plastic washer
–
Mount original spring retainer
501004-01
Shock absorber
fluid (SAE 2.5)
(50180751S1)
(
p. 18)
cn
of the seal ring retainer.
p. 19)
bp
and slide it under the
bq
.
bo
of the damper cartridge.
co
.
4
(included).
cl
.
cm
.
ASSEMBLY 5
15