KTM 76912955544 Manual Del Usario página 37

Disassembling the damper
–
Clamp the damper in the bench vise.
Guideline
Use soft jaws.
–
Remove locking cap
–
Push in seal ring retainer
–
Remove lock ring
501025-01
Info
Do not scratch the inside surface.
–
Remove the piston rod.
–
Unclamp the damper and drain the oil.
501024-01
Disassembling the piston rod
–
Clamp the foot section of the piston rod into the vise.
Guideline
Use soft jaws.
–
Remove nut
500993-01
–
Remove washers
–
Remove rebound shim stack
Info
Guide the rebound shim stack onto a screwdriver
and put them aside together.
500994-01
–
Remove piston
500995-01
bo
.
bp
.
bq
.
br
.
bs
.
bt
.
ck
.
ASSEMBLY 5
13