Using The Machine; Handwheel; Presser Foot Lifter; Changing The Presser Foot - JUKI MO-50e Manual De Instrucciones

Using the machine

Handwheel

The handwheel turns
counterclockwise.

Presser foot lifter

To raise the presser foot, raise
the lever on the rear of the
machine until it engages.

Changing the presser foot

- Switch the machine off " O ".
- Raise the presser foot.
Press the catch (A) to release the
presser foot from the clamp. Raise
the presser foot lifter to the highest
position and remove the presser foot
sole to the left. To attach the presser
foot sole, place it under the shaft.
The groove in the shaft should line
A
up exactly with the presser foot pin.
Lower the shank and the presser
foot will engage automatically.
18