Preparing The Machine / Using The Machine; Thread, Cones, Spools; Large Spools; Household Spools - JUKI MO-2800 Manual De Instrucciones

Preparing the machine / Using the machine

7
Thread / cones / spools
The anti-vibration cone should be
used with the wider edge at the
bottom on the spool holder pin
when sewing with cones.

Household spools

Remove the anti-vibration cones.
Place spools on spool holder
pins and push the spool caps
on with the rounded side down-
wards.

Waste collector

Clip the waste collector into the opening on the looper cover.
It catches the cut-off fabric as you sew, keeping your working
area neat and tidy.

Large spools

If large industrial spools are
used, position the anti-vibration
cone upside down on the spool
holder pin, i .e. with the wider
edge at the top.
Thread net
If the threads slip and get twist-
ed, cover the looper spools with
the net supplied in the accessory
bag.