Recording To A Tape -- Cd Synchro Recording/High Speed Dubbing/Recording Manually/Program Edit - Sony MHC-RG88 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Recording to a tape
–– CD Synchro Recording/High Speed Dubbing/Recording Manually/
Program Edit
You can record from a CD, tape, radio or other connected component. The recording level is adjusted
automatically.
Recording from a CD
Steps
(CD Synchro Recording)
1
Insert a recordable tape into deck B.
Press CD.
2
Load the CD you want to
3
record.
Press CD SYNC HI-DUB.
4
DECK B stands by for recording.
REC PAUSE/START indicator flashes.
Press DIRECTION repeatedly to select g to record on one side.
5
Select j (or RELAY) to record on both sides.
Press REC PAUSE/START. If you are recording manually, press hH to start
6
playing the source (for CD or Tape).
Recording starts.
7
Press x to stop recording.
Tips
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• For recording from the reverse side:
After step 1, press TAPE A/B to select deck B and
press hH twice to start playback of the reverse
side. Press x at the point where you want to start
recording. The TAPE B reverse side indicator lights
up.
• (High-Speed Dubbing only)
If you set direction to j when the tapes you use
have different lengths, the tapes in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Recording from a tape
(High-Speed Dubbing)
Press TAPE A/B repeatedly
to select TAPE A.
Load the tape you want to
record into deck A.
• For recording from a CD to a tape manually:
You can press . or > to select tracks during
recording pause mode (after step 4 and before step
6).
• You can mix the sound from the component
connected to the GAME INPUT jacks with another
function such as CD, tape, radio or MD connected
to this system. To record the mixed sound, press
GAME MIXING after step 4 of "Recording
Manually" and then press REC PAUSE/START to
start recording. Game Mixing does not function
during High-Speed Dubbing and CD Synchro
Recording.
Note
You cannot listen to other sources while recording.
MHC-RG88 AR 4-238-410-63 (1)
Recording Manually
Press a function button
for the recording source.
Load the CD or tape
(or other audio
sources), or tune to the
station you want to
record.
Press REC PAUSE/
START.
continued
13
GB

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido