Getting Started; Hooking Up The System - Sony MHC-RG88 Manual De Instrucciones

Getting Started

Hooking up the system

Do the following procedure 1 to 7 to hook up your system using the supplied cords and
accessories.
Surround
Front speaker
speaker (Right)
(Right)
1 Connect the system cord to the
SYSTEM CONTROL connectors
properly.
To disconnect
Be sure to make this connection before you
connect the main units power cord to a wall
outlet.
2 Connect the subwoofer.
Connect the subwoofer cord to
SUBWOOFER jacks as below. Be sure to
match the color of the cord and jacks.
Insert only the stripped portion.
Grey/Solid (3) Black/Stripe (#)
Note
Place the subwoofer at least 0.3m away from the main
unit.
GB
6
FM antenna
Subwoofer
R
Grey
AM loop antenna
5
6
2
1
3
4
7
4
Main Unit Front speaker
(Left)
3 Connect the front speakers.
Connect the speaker cords to the FRONT
SPEAKER jacks.
Insert only the stripped portion.
R
Red/Solid (3) Black/Stripe (#)
4 Connect the surround speaker.
Connect the speaker cords to SURROUND
SPEAKER jacks.
Insert only the stripped portion.
R
Blue/Solid (3) Black/Stripe (#)
Note
Keep the speaker cords away from the antennas to
prevent noise.
MHC-RG88 AR 4-238-410-63 (1)
Surround
speaker (Left)
Red
L
+
_
Blue
L
+
_