On lamp break
Should the lamp break, broken pieces may be scattered
around the projector. To avoid risk of injury, place a tray
to receive pieces or keep a no-go area around the projector.
On cleaning
• To keep the cabinet looking new, periodically clean it
with a soft cloth. Stubborn stains may be removed with
a cloth lightly dampened with a mild detergent solution.
Never use strong solvents, such as thinner, benzene, or
abrasive cleansers, since these will damage the cabinet.
• Avoid touching the lens. To remove dust on the lens, use
a soft dry cloth. Do not use a damp cloth, detergent
solution, or thinner.
On repacking
Save the original shipping carton and packing material;
they will come in handy if you ever have to ship your unit.
For maximum protection, repack your unit as it was
originally packed at the factory.
About the Optional
Accessories
The projection lamps of this projector are provided as
optional accessories. Install the lamp houses to the
projector according to your model.
For versatile use of the projector, the optional accessories
mentioned below can be used with the projector. Select to
use them according to your system requirements.
For details on optional accessories, refer to the relevant
Operating Instructions.
Lamp house
• LKRX-B110 projection lamp house for SRX-R110
• LKRX-B105 projection lamp house for SRX-R105
Lamp for replacement
• LKRX-110 projection lamp for SRX-R110
• LKRX-105 projection lamp for SRX-R105
Projection lens
• LKRL-Z115 1.48- to 1.81-times zoom lens
• LKRL-Z117 1.72- to 2.39-times zoom lens (with zoom/
focus memory function)
• LKRL-Z119 1.81- to 2.94-times zoom lens (with zoom/
focus memory function)
• LKRL-Z122 2.33- to 3.96-times zoom lens (with zoom/
focus memory function)
• LKRL-Z140 3.81- to 7.12-times zoom lens
• LKRL-90 0.9-times fixed focus lens
Input board
• LKRI-001 analog input board
• LKRI-002 HD-SDI (4:2:2) input board
• LKRI-003 HD-SDI/DC-SDI (4:4:4) input board
About the Optional Accessories
5
GB