Specifications; Special Accessories - Stihl FH-KM Manual De Instrucciones

Definitions
1 Cutting Blades
Steel blades for cutting hedges and
shrubs.
2 Blade Scabbard
Covers cutting blades when hedge
cutter is not in use.
3 Blade Drive Gear
Converts rotary movement of angle
drive into reciprocating movement
of cutting blades.
4 Quadrant
Locks the cutter bar in the required
position.
5 Angle Drive
Transmits rotary motion of drive
shaft to the blade drive gear.
6 Adjusting Lever
Used to set cutter bar to the
required angle.
7 Sliding Sleeve
Locks and unlocks the cutter bar
adjusting mechanism.
8 Drive Tube
Encloses and protects the drive
shaft between the coupling sleeve
and gearbox.
9 Sleeve
Locates drive tube in coupling
sleeve.
FH-KM

Specifications

Cutting Blades
Type: Double-edged for
bidirectional
cutting
Cutting length: 9.8 in. (250 mm)
Tooth spacing: 1.4 in. (35 mm)
Tooth height: 0.8 in. (20 mm)
Sharpening angle: 45° to horizontal
Weight
5.3 lbs. (2.4 kg)

Special Accessories

Contact your STIHL dealer for
information regarding special
accessories that may be available for
your product.
English
17