Specifications; Special Accessories - Stihl KM 90 Manual De Instrucciones

English / USA

Specifications

EPA / CEPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category:
A = 300 hours,
B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours,
Intermediate = 125 hours,
Moderate = 50 hours
STIHL single cylinder four-stroke
engine with gas-oil lubrication
Displacement:
3
1.73 cu.in (28.4 cm )
Bore:
1.5 in (38 mm)
Stroke:
0.98 in (25 mm)
32
Engine power to ISO 8893:
1.3 bhp (0.95 kW)
at 7,000 rpm
Idle speed
2,800 rpm
Engine cut-off speed
10,500 rpm
Valve clearance
Inlet valve: 0.004 in (0.10 mm)
Exhaust valvel: 0.004 in (0.10 mm)
Fuel tank capacity
18.0 fl.oz (0.53 l)
Spark plug (resistor type)
Bosch USR 7AC
Electrode gap 0.02 in (0.5 mm)
Weight
(without tool and deflector)
KM 90 R
with loop handle: 9.9 lb (4.5 kg)
KM 90
with bike handle: 10.6 lb (4.8 kg)

Special Accessories

Contact your STIHL dealer for
information regarding special
accessories that may be available for
your product.
KM 90, KM 90 R