Balancing The Trimmer; Adjusting The Loop Handle - Stihl FSA 130 R Manual De Instrucciones

Ocultar thumbs Ver también para FSA 130 R:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 69
7 Adjusting Trimmer for User
7.3.3
Fitting and Adjusting the Carrying System
► Put on the shoulder strap (1).
► Adjust the shoulder strap (1) so that the carabiner (2) is
about a hand's width below your right hip.
7.4

Balancing the Trimmer

The cutting attachment should rest lightly on the ground.
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
0458-725-9821-C
1
2
► Connect the carrying ring (2) to the carabiner (1).
► Wait for the trimmer to stop swinging.
Check position of cutting attachment. If it needs adjustment:
3
► Loosen the screw (3).
► Move carrying ring (2) up or down the drive tube until
correct balanced position is reached.
► Tighten down the screw (3) firmly.
7.5

Adjusting the Loop Handle

The loop handle can be set to different positions to suit the
height and reach of the user.
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
English
1
2
2
55

Publicidad

Tabla de contenido
loading

Tabla de contenido