6. Connection
Be sure not to apply power before making connections.
6-1. Power cable
Use DC12V (10.5V to 28V), or AC24V (± 10%) in both 60Hz and 50Hz.
* This installation should be made by a qualified service person and should
conform to all local codes.
6-2. Video output cable (BNC)
This is a video output terminal. To be use an ordinary video output, for monitors,
or switcher.
6-3. Test monitor output (MONI.OUT)
This RCA type connector is an extra video output to be used for an adjustment
and a setup. This makes it easier to do focus adjustment, or camera positioning
for field of view.
E-8