Ikegami ISD-A30 Manual De Instrucciones página 17

8-4-2. LIGHT CONTROL
(1) Select LIGHT CONTROL on the
main menu screen. Press the E
button, and the screen at right
shows up.
(2) BACKLIGHT CMP.:
Highlight this item and the backlight compensation modes can be selected
(ON, 1SPOT, 2SPOT and OFF).
① ON
Normal backlight compensation mode is in effect.
② 1SPOT
Select "ISPOT" and press the
"E" button, and the screen
shown at right appears.
Highlight "ADJUST ZONE"
and press the "E" button, and
t h e B L C c o m p e n s a t i o n
sensing area setting screen
comes up.
Each time the E button is
pressed, the assigned area
color changes in turn Blue,
Green and Red in this order.
• In case of Blue:
Using the U, D, L or R
button, the field can be
moved wherever you like.
• In case of Green:
Using the U, D, L or R button, the field can be enlarged.
• In case of Red
Using the U, D, L or R button, the field can be reduced.
* To quit the field setting screen, hold down the E button longer than
2 seconds.
ＬＩＧＨＴ ＣＯＮＴＲＯＬ
→ＢＡＣＫＬＩＧＨＴ ＣＭＰ． ＯＦＦ
Ｗ．ＤＹＮＡＭＩＣ
ＩＲＩＳ ＬＥＶＥＬ
ＬＥＮＳ ＩＲＩＳ
ＦＦＤ ＯＦＦ
ＲＥＴ
１ＳＰＯＴ ＺＯＮＥ
→ＡＤＪＵＳＴ ＺＯＮＥ
ＲＥＴ
ＳＰＯＴ ＺＯＮＥ−１ ＥＮＴ：２ＳＥＣ→ＲＥＴ
E-14