Ikegami ISD-A30 Manual De Instrucciones página 25

⑤ P. Mask Setting 1st Stage:
After the above ④, Mask
size is decided. Push E
button with the ④ screen,
mask color is changed to
translucent Blue color as
shown on ⑤.
The size of mask can be
changed by U,D,R and L button, to use the left upper corner as a base
point.
Each button is for;
U : Moves a mask bottom line to above (Shrink height)
D : Moves a mask bottom line to below (Enlarge height)
R : Moves a mask right side to right (Enlarge width)
L : Moves a mask right side to left
⑥ P. Mask Setting 2nd Stage:
The screen of ⑥ shows after
enlarged the screen ⑤→ by
using D and R buttons. If you
want to change the mask
position, push E button and
change the screen to a
translucent sky blue screen.
When multiple masks are selected, the following sequence will be shown
and un-selected mask numbers, as display OFF position will be skipped.
Mask1 Sky blue→ Mask1 Blue→ Mask2 Sky blue→ Mask2 Blue→
Mask3 Sky blue→ Mask3 Blue→ Mask4 Sky blue→ Mask4 Blue→
Mask5 Sky blue→ Mask5 Blue→ Mask6 Sky blue→ Mask6 Blue→
Mask7 Sky blue→ Mask7 Blue→ Mask8 Sky blue→ Mask8 Blue→
Mask1 Sky blue→ Mask1 Blue→ Mask2 Sky blue and so on.
Translucent blue color
(Shrink width)
E-22