Ikegami ISD-A30 Manual De Instrucciones página 12

7. Angle and Lens adjustment
7-1. Remove the dome cover
Before doing this, the clear dome cover has to be removed. This is done by
loosening the ornamental ring. Turn the ornamental ring counter-clockwise.
Pay attention not to drop a dome cover or an ornamental ring while doing this.
7-2. Lens adjustment
To re-direct lens, loosen the lens fixing screws for rotation and for elevation.
Adjust the zoom knob for framing and angle, and a focus knob for focusing.
Using those two knobs, adjust the lens to have desired framing, angle and
focal point. Repeat this procedure a couple of times, so that you may achieve
the best result.
Once the desired settings have been achieved, tighten the screws to fix the
position.
Zoom knob
Focus knob
E-9