Ikegami ISD-A30 Manual De Instrucciones página 27

(9) Video Standard: This camera is
set at NTSC standard.
This changes video standard
between NTSC and PAL.
Af ter sel ec ti ng thi s vi de o
standard and push E button,
then the following warning
message will appear on a
screen.
① Cancel : goes back to the
Special Menu screen.
② OK : Selection screen will
appear, as shown left.
With L or R button, NTSC or
PAL can be selected.
(Note: Ever time changing
the standard, all the parameters of video related items goes back to
the factory setting position)
③ RET for returning to the special menu screen.
Please take utmost case when selecting this video standard. A wrong
selection may cause non-video display or sand storm screen.
But this is not a maul-function, just a wrong selection of the standard.
(10) COLOR BAR
Press the E buttons to get the color displayed. Press the E button again to
go back to the SPECIAL MENU screen.
(11) RET
Used to go back to the main menu screen.
ＷＡＲＮＩＮＧ！！
Ｉｆ ｔｈｅ ｓｅｔｔｉｎｇ ｏｆ ｔｈｅ
ｖｉｄｅｏ ｓｔａｎｄａｒｄ ｉｓ ｃｈａｎｇｅｄ,
ａｌｌ ｔｈｅ ｓｅｔｔｉｎｇｓ ａｒｅ
ｉｎｉｔｉａｌｉｚｅｄ．
Ｄｏ ｙｏｕ ｃｈａｎｇｅ ｔｈｅ ｓｅｔｔｉｎｇ?
→ＣＡＮＣＥＬ
ＯＫ
ＳＥＬＥＣＴ ＶＩＤＥＯ ＳＴＡＮＤＡＲＤ
→ＶＩＤＥＯ ＳＴＡＮＤＡＲＤ ＮＴＳＣ
ＲＥＴ
E-24