Ikegami ISD-A30 Manual De Instrucciones página 24

③ Size and Position Setup Screen for P. Mask:
With this screen, size and
position of each masking
area can be set.
The mask to choose with the
② screen is displayed in
translucent sky blue color
w h i l e o t h e r s e l e c t e d
numbers of masking are
displayed in translucent grey color.
The numbers and areas not being chosen for Masking will not displayed.
* These colors in this screen are not the final masking color. Masking
color is decided in later process.
④ Position Setting of P. Mask:
With the screen of ③ and
use U D L R buttons you can
m o v e t h e p o s i t i o n o f
masking. In this process, the
size of Mask does not
change.
Set the left upper corner of
the desired masking area as
shown in ④.
Mask 1
Translucent sky blue color
Mask 2
Translucent grey color
Set the position of masking at the left
upper corner of the desired masking
object by moving the position of
masking with U D L R buttons.
The broken line indicates the desired position
of masking. (Please set rather large size)
E-21