Sun Microsystems Netra t 1120 Manual De Seguridad página 9

English
Products with the CE marking comply with the protection requirements of the
following EU Directives:
EMC Directive 89/336/EEC, as amended by 93/68/EEC, by application of the
following harmonised standards:
EN 55022: 1994—Electromagnetic Interference
EN 50082-1: 1992—Electromagnetic Immunity:
Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC, by application of
the following harmonised standard:
EN60950: 1992 AMD3, Safety of Information Technology Equipment.
Warning – This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate
measures to correct this interference.
To Ensure Compliance
The following additional components or accessories are required:
1. Shielded cables having earthed metal shells shall be used for connection to all
input/output ports.
2. Cable connectors shall be shielded type (e.g. shielded RJ45 plugs).
3. Ethernet cables shall be IEEE 802.3 compliant, and shall be of the Shielded
Twisted Pair type (STP).
4. If Ethernet Micro-Transceivers are to be connected directly to the AUI ports (15-
way Ethernet ports) they shall:
a. comply with IEEE 802.3 Ethernet requirements for 10BaseT,
b. meet the CISPR 22 Class B requirements for emissions, and
c. be of the Shielded Twisted Pair type. (Recommended types are Milan Micro-
Twist Model # MIL-10P, 3COM ISOLAN TP, or other specification equivalent
types. Always ask to see manufacturer's Certificate of Compliance or other supporting
data to authenticate compliance.)
European Union Notice 5