Security Measures - Garland MONTANA 110 Manual De Instrucciones

ÍNDEX
1. Introduction
2. Security measures
3. Warning symbols
4. Machine symbols
5. Machine description
6. Start up instructions
7. Using the machine
8. Maintenance and service
9. Trouble shooting
10. Transport
11. Storage
12. Recycling or disposal of your machine
13. Warranty conditions
Declaration of conformity
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Ref.:GMSMONTANA110V15M1214V2
DATE OF PUBLICATION: 11/12/2014
DATE OF REVISION: 25/11/2016
1. INTRODUCTION
34 Thank you for choosing this Garland machine. We
are confident that you will appreciate the quality and
35 performance of this machine, which will facilitate your
task for a long period of time. Remember that this
42 machine has the most extensive and expert technical
assistance network which you can consult for the
42 maintenance, troubleshooting and purchase of spare
parts or accessories.
44
SECURTY FIRST.
46
50
56
used by a qualified operator who follows a security
60 integration system on the carefully designed job. Only
use this chainsaw for the pruning of trees under these
62 specific conditions. Please read the instruction manual
carefully.
62
Warning! The operators that work with this chainsaw
62 in the pruning of trees at height with a rope and
harness must never work alone. There must always
62 be a qualified second worker on the ground in case of
emergency.
63
Warning! The operators that work with this chainsaw
in the pruning of trees must receive training on
safe climbing, safe positioning techniques, and be
equipped with harnesses, ropes, carabiners, fastening
straps, and other equipment to ensure that they are
kept in safe work positions for both operators and
chainsaw.
Warning! Read all safety warnings and
all instructions. The failure to observe all
warnings and instructions below can result in
35/160
Warning! This chainsaw is a
special product, specifically
designed for the pruning of
trees. This chainsaw can only be
English