Warning Symbols; Machine Symbols - Garland MONTANA 110 Manual De Instrucciones

English

3. WARNING SYMBOLS

The warning labels indicate required information for
the use of the machine.
This icon indicates instructions which
must be followed to prevent accidents
that could result in serious bodily harm
or death.
operator who follows a safety integration system for
the carefully planned job, only use this chainsaw for
the pruning of trees under these specific conditions.
For the rest of operations, this chainsaw is designed
to be used with two hands in the same way as with a
conventional saw. Please read the instruction manual
carefully.
It is necessary to carefully read
this user instruction manual
before using the machine.
You must wear adequate protection for
the ears, eyes, and head.
Use adequate protection for the feet, legs,
hands, and forearms.
Risk of the chainsaw bouncing.
Warning and Caution.
Hot Surface! Burn risk.
Warning! This chainsaw is a
special product, specifically
designed for the pruning of
trees. This chainsaw may
be used only by a qualified
Use protective non skid boots with
protective steel.
Use appropriate security gloves.
Do not smoke or get flames near the fuel
or machine.
Do not use the machine in adverse
climatic conditions. Do not use when
raining.
In order to guarantee safe and proper use and
maintenance of the machine, the following symbols
appear on the machine.

4. MACHINE SYMBOLS

Fuel tank. It is located in the fuel tank cap.
MIXTURE of oil 2 times and gasoline.
The chain´s oil tank. Located in the chain's
oil tank cap.
Start to switch positions that are found on the right
side of the machine:
"O" = Off (The machine does not work)
"I" = On (The machine is ready for use)
Air positions:
Pull the air button to close off air flow.
Push the air button to open the air flow.
Found on the lateral right of the machine.
42/160
Use this tool with both hands.