Waeco MagicSpeed MS-400 Instrucciones De Montaje página 43

MS-400.qxd 24/06/03
Depending on the vehicle's equipment, the following date may need to be reprogrammed:
Radio-code...vehicle clock
Instructions on how to reset these can be found in the relevant operating instructions.
Caution! Only a voltmeter may be used to check the voltage in electrical cables
(see
Caution! To avoid damage, always ensure that there is enough space for the
drill bit to emerge. Every drill hole must be deburred and treated with a
rustproofing agent.
Caution! When installing the electrical connections, ensure they:
are not sharply bent and twisted,
2. do not rub at the edges,
3. are not inserted through sharp-edged openings.
Caution! Ensure that it is not necessary for the driver to insert his hand through
the steering wheel and that the magic speed components are not within the
deployment area of the vehicle's airbag and the head impact range.
WAECO International does not accept any liability for damages due to the following:
a) incorrect assembly
b) damage to the system by mechanical effects and overvoltages
c) modifications to magic speed without the explicit approval of WAECO International
d) use for any purposes other than those described in the assembly instructions.
15:10 Page 43
Safety and installation instructions
timeswitch clock onboard computer seat position
B 2).
43