Removing The Camcorder - Sony MPK-DVF2 Manual De Instrucciones

Ocultar thumbs Ver también para MPK-DVF2:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Removing the camcorder

Before opening the marine pack, rinse it with fresh water and dry with a soft cloth.
Note
• When you open the marine pack, make sure you are dry. And take care that no water
drips from your wet suit.
• When you open the marine pack, do not pull the monitor plug cord by force.
(1) Remove the grip.
(2) Unfasten 3 buckles and open the marine pack.
For DCR-TRV8E/TRV9E/TRV10E/TRV890E/TRV900E, disconnect the monitor
cord from the camera mounting shoe B.
(3) Take the camcorder out of the front shell.
Holding the camera mounting shoe by the knobs and extract the camcorder.
(4) Disconnect the remote plug and the microphone plug.
(5) Disconnect the monitor plug (for DCR-TRV7E), the A/V connecting cable of
camera mounting shoe B (for DCR-TRV8E/TRV9E/TRV10E/TRV890E/TRV900E)
from AUDIO/VIDEO jack.
When you take the camcorder out of the shell, be careful not to pull the remote
cord, microphone cord or A/V connecting cable.
(6) Remove the camera mounting shoe.
(7) Remove the battery pack for the LCD monitor.
3
5
6
DCR-TRV7E
4
DCR-TRV8E/TRV9E/TRV10E/
TRV890E/TRV900E
After using
GB
15
-GB

Publicidad

Tabla de contenido
loading

Tabla de contenido