Removing the camcorder
Before opening the marine pack, rinse it with fresh water and dry with a soft cloth.
When you open the marine pack, make sure you are dry. And take care that no water
drips from your wet suit.
For DCR-HC40/HC40E/HC30/HC30E/HC20/HC20E/HC18E/HC16E
1
Remove the grip.
2
Unfasten 3 latches and open the marine pack.
3
Disconnect the monitor cord from the
A/V conversion cable.
4
Take the camcorder out of the front shell.
Hold the camera mounting shoe by the knobs and
extract the camcorder.
When you open the marine pack, do not pull the
monitor plug cord by force.
5
Disconnect the remote plug, the
microphone plug and the A/V
conversion cable.
6
Remove the mounting shoe from the camcorder.
7
Remove the batteries from the LCD monitor battery compartment.
GB
continued
25
-GB