Sony VPL-HS3 Manual De Instrucciones página 16

5
Adjust the focus using the
FOCUS ring, and adjust the
picture size using the ZOOM
ring.
ZOOM ring
6
Adjust the position of the
picture to fit the screen using
the adjuster.
Adjusting the picture position using
the adjuster
Hold down and slide the adjuster lock lever to the
right, move the projector, then return the lock lever.
You can move the projector horizontally or vertically
within the following ranges:
Up to 30° each
way horizontally
To reset the projector to the center position
of the adjuster
Hold down and slide the adjuster lock lever to the
right, move the projector, then return the lock lever
16
Step 3: Adjusting the Picture Size and Position
GB
FOCUS ring
Adjuster lock lever
Up to 10° each way
vertically
until the adjuster clicks into
lower side at the rear of the projector with a click.
Adjusting the picture position using
the supplied adjuster spacer
Attaching one of the supplied spacers for adjuster
º
adjustment (spacers for 1
the projector to the right or left at a tilting angle up to
º
2 .
Adjuster spacer (supplied)
To attach the supplied adjuster
spacer
1 Place a thick cloth (e.g., a cushion)
beneath the projector. Place the projector
face down.
2 While pressing the lock knobs inward,
remove the adjuster bar at the bottom of
the adjuster table to which you want to
attach the supplied spacer.
3 Fit the spacer into the removed adjuster
bar spot.
the round hole in the
Round
hole
°)
and 2 allows you to tilt
Adjuster spacer
(supplied)