Warning Messages; Caution Messages - Sony VPL-HS3 Manual De Instrucciones

Sound
c Check that connecting cables are
No sound.
properly connected. (1 page 9)
c Adjust "Volume" in the
PICTURE SETTING
(1 page 29), or press
VOLUME + on the remote
control.
c Press MUTING on the remote
control.
On-screen display
c Set "Status" in the MENU
On-screen display does
not appear.
SETTING
(1 page 31)
Remote control
c Batteries could be weak.
The remote control
does not work.
Replace with new batteries. (1
page 5)
c Insert the batteries with correct
polarities. (1 page 5)
Indicators
The LAMP/COVER or TEMP/FAN indicator on the
control panel lights up or flashes if there is any trouble
with your projector.
LAMP/COVER Indicator
TEMP/FAN Indicator
LAMP/ TEMP/
COVER FAN
c Attach the lamp cover or the air filter
LAMP/COVER
flashes.
cover securely. (1 pages 36 and 38)
c The lamp has reached the end of its
LAMP/COVER
lights up.
life. Replace the lamp. (1 page 36)
c The lamp becomes a high temperature.
Wait for one minute to cool down the
lamp and turn on the power again. (1
page 24)
c The fan is broken. Consult with
TEMP/FAN
flashes.
qualified Sony personnel.
c The internal temperature is unusually
TEMP/FAN
lights up.
high. Check to see if nothing is
blocking the ventilation holes.
c Check to see whether or not the
projector is being used at high
altitudes.
menu
menu to "On."
POWER ON/
SAVING STANDBY
LAMP/COVER c The electrical system breaks down.
and TEMP/FAN
Consult with qualified Sony
light up.
personnel.

Warning Messages

Use the list below to check the meaning of the
messages displayed on the screen.
c Turn off the power.
High temp.!
Lamp off in 1
c Check to see if nothing is blocking the
min.
ventilation holes.
c Input a signal that is within the
Frequency is
out of range!
acceptable range of the frequency.
c Set the output signal on an external
monitor of the connected computer to
SVGA.
c Set "Input-A Signal Sel." in the SET
SETTING
c Set "Input-A Signal Sel." in the SET
Please check
Input-A Signal
SETTING
Sel.
when RGB signal is input from the
computer. (1 page 31)
c It is time to replace the lamp. Replace
Please replace
the LAMP.
the lamp. (1 page 36)
c It is time to replace the air filter. Replace
Please replace
the filter.
the air filter. (1 page 38)
c The iris is damaged.
Iris unit doesn't
work.
c Consult with qualified Sony personnel.

Caution Messages

Use the list below to check the meaning of the
messages displayed on the screen.
c No signal is input in the selected input.
Check connections.
Not applicable! c Press the appropriate button.
menu to "Computer."
menu to "Computer"
35
Troubleshooting
GB