Sony VPL-HS3 Manual De Instrucciones página 23

2
Press the [/1 (on/standby)
switch to turn on the projector.
The ON/STANDBY indicator lights in green.
3
Turn on the equipment
connected to the projector.
Refer to the operating instructions of the
connected equipment.
4
Press INPUT repeatedly to
select the input you want to
project on the screen.
Display the indication of the input you want.
Example: To view the picture from the video
equipment connected to the VIDEO
INPUT jack.
INPUT
To view the picture from
Video equipment connected to
VIDEO INPUT on the projector
Video equipment connected to S
VIDEO INPUT on the projector
RGB/component equipment
connected to PJ MULTI INPUT via
the optional signal interface cable or
the interface unit
Video equipment connected to PJ
MULTI INPUT via the optional signal
interface cable or the interface unit
Video equipment equipped with S
VIDEO connected to PJ MULTI
INPUT via the optional signal
interface cable or the interface unit
Equipment connected to HDMI
INPUT on the projector
ON/ Lights in green.
STANDBY
V i d e o 1
NTSC 3.58
Press INPUT to
display
Video 1
S-Video 1
*
Input-A
Video 2
S-Video 2
HDMI
*
Set the "Input-A Signal Sel." setting in the SET SETTING
menu according to the input signal. (1 page 31)
5
Turn the ZOOM ring to adjust
the size of the picture.
ZOOM ring
6
Turn the FOCUS ring to adjust
the focus.
Adjust to obtain sharp focus.
7
Press VOLUME + or – to adjust
the volume.
VOLUME
Projecting the Picture on the Screen
FOCUS ring
23
GB