About The Preset Memory No - Sony VPL-HS3 Manual De Instrucciones

INSTALL SETTING
Item Description
V Keystone Corrects the vertical trapezoidal distortion of
the picture. (
Auto: Normally set to this postion.
Manual: Sets a lower value (– direction)
Note
The "V Keystone" adjustment may not correct
the trapezoidal distortion perfectly, depending on
the room temperature or the screen angle. In this
case, adjust the distortion manually.
Side Shot Corrects the horizontal trapezoidal distortion
of the picture. (
Set the level to "0" when you adjust the
picture using "V Keystone" only.
Note
Even when projecting using "Side Shot," four
sides of a picture may sometimes not be parallel
to the sides of a screen frame.
Image Flip Flips the picture on the screen horizontally
and/or vertically.
Off: The picture does not flip.
HV: Flips the picture horizontally and
H: Flips the picture horizontally.
V: Flips the picture vertically.
Background Selects the background color of the screen
when no signal is input. You can select
"Black" or "Blue."
Test Pattern When set to On, a test pattern is displayed on
the screen when adjusting using "Side Shot"
or "V Keystone." If you do not want to
display a test pattern, set to Off.
High Altitude Off: Use this setting when using the
Mode
On: Use this setting when using the projector
Note
When using the projector at high altitudes with
Off setting, the following message may appear.
"Probably use in high altitude. Switch to high
altitude mode on? YesR Nor
If you select "Yes," "High Altitude Mode"
turns automatically to On.
INFORMATION
Item Description
fH Displays the horizontal frequency of the input
signal.
fV Displays the vertical frequency of the input
signal.
Lamp Timer Indicates how long the lamp has been turned
on.
32
Menu Lists
GB
)
when the bottom of the trapezoid is longer
than the top. Sets a higher value (+
direction) when the top of the trapezoid is
longer than the bottom. If you project the
picture using "Side Shot" only, set to
"Manual," and adjust the level to "0."
)
vertically.
projector at normal altitudes.
at an altitude of 1,500 m or higher.
About the Preset Memory
No.
This projector has 34 types of preset data for input
signals (the preset memory). When the preset signal is
input, the projector automatically detects the signal
type and recalls the data for the signal from the preset
memory to adjust it to an optimum picture. The
memory number and signal type of that signal are
displayed in the INFORMATION menu.
I N F O R M AT I O N
I n p u t A
f H : 4 8 . 4 7 k H z
fV: 60.00Hz
No.23
1 0 2 4 x 7 6 8
L a m p T i m e r : 0 H
You can also adjust the preset data through the INPUT
SETTING menu.
This projector also has 20 types of user memories for
Input-A into which you can save the setting of the
adjusted data for an unpreset input signal.
When an unpreset signal is input for the first time, a
memory number is displayed as 0. When you adjust
the data of the signal in the INPUT SETTING menu,
it will be registered to the projector. If more than 20
user memories are registered, the newest memory
always overwrites the oldest one.
See the chart on page 44 to find if the signal is
registered to the preset memory.
Since the data is recalled from the preset memory
about the following signals, you can use these preset
data by adjusting "H size." Make fine adjustment by
adjusting "Shift."
Signal Memory No.
Super Mac-2 23
SGI-1 23
Macintosh 19" 25
Note
When the aspect ratio of input signal does not match the screen
size, a part of the screen is displayed in black.
Memory No.
Signal type
H size
1312
1320
1328