Sony VPL-HS3 Manual De Instrucciones página 7

Near a heat or smoke sensor
Malfunction of the sensor may be caused.
Very dusty and extremely smoky
Do not use the projector under the following
conditions:
Tilting the unit extremely
Blocking the ventilation holes
Ventilation
holes
(exhaust)
Tip
For further details on the location of the ventilation holes (intake
or exhaust), see "Location of Controls" on pages 45 and 46.
Placing the projector without the adjuster
Placing the projector upside down
Do not place the projector upside down on the table
etc. The projector will be unstable.
Note
Installing the unit at altitudes
When using the projector at an altitude of 1,500 m or
higher, turn on high altitude mode in the INSTALL
SETTING menu. Failing to set this mode when using
the projector at high altitudes could have adverse
effects, such as reducing the reliability of certain
components.
Ventilation
holes
(intake)
Step 1: Installing the Projector
7
GB