Sony FWD-S42H1 Manual De Instrucciones página 58

010COV.book Page 12 Friday, June 27, 2008 7:25 AM
Parts
qf VIDEO
qg HD15 (RGB/
COMPONENT)
(D-sub 15-pin)
qh DVI
(DVI-D 24-pin)
qj OPTION slot
(VIDEO/COM port)
* The status when the sound is output and the input signal can be switched.
12
GB
Description
S VIDEO IN (Mini DIN 4-pin): Connects to the S Video output of a piece of video
equipment.
VIDEO IN (BNC): Connects to the video output of a piece of video equipment.
VIDEO OUT (BNC): Connects to the video input of a piece of video equipment. Pictures
input from VIDEO IN will be output.
AUDIO IN (Stereo mini jack): Connects to the audio output of a piece of video
equipment.
HD15 (RGB/COMPONENT) IN: Connects to the analog RGB signal or component
signal output of a piece of video equipment or PC. See page 44.
AUDIO IN: Inputs an audio signal. Connects to the audio signal output of a piece of
video equipment or PC.
HD15 (RGB/COMPONENT) OUT: Connects to the analog RGB signal or component
signal input of a piece of video equipment or PC. See page 44. Signals input from the
HD15 (RGB/COMPONENT) IN connector above will be output.
Notes
• When inputting a component signal, be sure not to input sync signals to pins 13 and 14.
If you do so, the picture may not be displayed properly.
• When the display is not connected to an AC power or is in the standby mode, no signal
is output from the HD15 (RGB/COMPONENT) OUT.
DVI IN: Connects to the digital signal output terminal of the video equipment or PC.
Supports HDCP copy protection.
AUDIO IN: Inputs an audio signal. Connects to the audio signal output of a piece of
video equipment, etc.
This slot supports video signals and communication functions. Attach an optional adaptor
(the BKM-FW series) in this slot to extend monitor functions. See page 18.
FWD-S42H1/FWD-S47H1
4-111-559-01(1)