Start-Up; Charging Base; Handpiece - Ivoclar Vivadent Bluephase Instrucciones De Uso

Start-up

Check the delivery for completeness and any possible
transportation damage (see delivery form). If components
are missing or damaged, immediately contact your dealer
or your Service Center.

Charging base

Before you switch on the device, make sure that the volt-
age mentioned on the rating plate complies with your
local power supply. The rating plate is attached to the
underside of the charging base.
Place the charging base on a suitable, flat table top.
Remove the protective foil from the connection plug of
the power pack. Slide the connection plug of the power
pack into the socket on the underside of the charging
base. Tilt it slightly and apply slight pressure until you
hear and feel it snap into place.
Connect the power cord with the power supply and the
power pack. The Power ON indicator on the left side of
the housing lights up in blue (see Indicators on the
charging base).
8

Handpiece

Before you insert the light probe, remove the protective
foil on the corresponding opening of the handpiece.
Slightly turn the light probe while attaching it to the
handpiece.
After that, mount anti-glare protection on the light
probe.