Mounting The Deflector; Mounting The Cutting Attachment - Stihl FS 70 Manual De Instrucciones

Mounting the Deflector

Use the right deflector
WARNING
Deflector (1) is approved for mowing
heads only and must therefore be
mounted before fitting a mowing head
2
WARNING
Deflector (2) is approved for grass
cutting blades only and must therefore
be mounted before fitting a grass cutting
blade.
Mounting the Deflector
Deflectors (1) and (2) are both mounted
to the gearbox in the same way.
FS 70 R
1
Position the deflector against the
N
gearbox so that the lug (3) engages
the recess (4) in the deflector.
Insert the screw (5) and tighten it
N
down firmly.
Mounting the Cutting
Attachment
Laying down the machine
Switch off the engine
N
Lay down the machine so that the
N
mount for the cutting attachment
faces upward
Fitting the Thrust Plate
The machine comes standard with the
thrust plate.
1
Slip the thrust plate (1) over the
N
shaft (2).
NOTICE
The thrust plate on the gearbox is
necessary for mounting cutting tools.
English
19