Mounting The Loop Handle - Stihl FS 70 Manual De Instrucciones

8 STIHL PolyCut 20-3
Metal cutting attachments
9 Grass cutting blade 230-4
(230 mm dia.)
10 Grass cutting blade 230-8
(230 mm dia.)
WARNING
Non-metal grass cutting blades are not
approved.
Deflectors
11 Deflector with blade, for mowing
heads
12 Deflector for metal cutting
attachments
Handle
13 Loop handle
14 Loop handle with
15 barrier bar
Harness
16 Shoulder strap may be used
17 Shoulder strap must be used
18 Full harness may be used
WARNING
Based on the cutting attachment being
used:
Choose the proper deflector in order to
reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
FS 70 R
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of injury from loss of
control and contact with the cutting
attachment: use grass cutting metal
blades on this unit only if equipped with
a bike handle or a loop handle with
barrier bar.
Do not use rigid plastic blades, brush
knifes or circular saw blades on this unit.

Mounting the Loop Handle

A factory-new machine comes with the
loop handle already mounted.
Using the Barrier Bar
A barrier bar may have to be mounted to
suit the cutting attachment you intend to
use – see "Approved Combinations of
Cutting Attachment, Deflector, Handle
and Harness".
The barrier bar comes standard with the
machine or is available as a special
accessory.
English
17