Mounting The Deflector; Mounting The Cutting Attachment - Stihl FS 565 Manual De Instrucciones

English

Mounting the Deflector

Use the right deflector
Deflector (1) is approved for
mowing heads only and must
therefore be mounted before
fitting a mowing head
2
Deflector (2) is approved for grass
cutting blades only and must
therefore be mounted before
fitting a grass cutting blade.
Mounting the deflector
Deflectors (1) and (2) are both mounted
to the gearbox in the same way.
20
1
N Position the deflector against the
gearbox so that the lug (3) engages
the recess (4) in the deflector.
N Insert the M 5 x 14 screw (5) and
tighten it down firmly.
Mounting the Cutting
Attachment
Preparations
N Lay your trimmer/brushcutter on its
back so that the cutting attachment
mounting face is facing up.
Fitting the thrust plate
The machine comes standard with the
thrust plate.
1
N Slip the thrust plate (1) over the
shaft (2).
The thrust plate on the gearbox is
necessary for mounting cutting
attachments.
FS 56, FS 56 R, FS 56 C, FS 56 RC