Preprogrammed Button Functionality - Lutron GRAFIK Eye QS Serie Manual De Montaje Y Utilización

Preprogrammed Button Functionality

The GRAFIK Eye QS System controls lights without special programming. The factory
®
defaults for the lighting column buttons are shown below for both dimmable and non-
dim zones. See pages 15 through 17 for methods for changing scene settings.
R
Lighting Column Button Preprogramming
(Factory Default: Dimmable Loads)
Scene 1: All lights to 100%
Scene 2: All lights to 75%
Scene 3: All lights to 50%
Scene 4: All lights to 25%
Scene Off: All lights to 0%
Lighting Column Button Preprogramming
(Factory Default: Non-Dim Loads)
Scene 1: All lights On
Scene 2: All lights On
Scene 3: All lights On
Scene 4: All lights On
Scene Off: All lights Off
Shade Column Button Preprogramming
(Factory Default: Sivoia QS shades)
All shades fully open
All shades to 50%
All shades fully closed
Lower/Raise all shades
GRAFIK Eye QS System Installation and Operation Guide 10
®