Scene Setup
Name a Scene
1. Enter programming mode (see page 12).
Main menu
2. Use the master buttons to highlight "Scene setup"
Occ sensor
and press the OK button to accept.
Scene setup
Scene setup
3. Use the master buttons to highlight "Labels" and
press the OK button to accept.
4. Use the master buttons to change the scene
Scene setup
number to your desired scene. Press the OK
button to accept.
Levels
5. Use the master buttons to highlight "Custom" and
Labels
Labels
Labels
press the OK button to accept.
6. Use the master buttons to scroll through the
Select scene:
characters (lowercase and uppercase letters, plus
numbers 0-9). The character you are currently
Scene 1
changing will be underlined on the screen. Press
OK to select the character you want, then repeat
for all available characters. Choose a space (no
character) and press OK for any remaining
Label scene 1
characters. Press the OK button to accept.
7. The info screen will display a confirmation screen
Custom
that your name has been saved.
8. Exit programming mode (see page 12).
Label scene 1
1 / 11
A
1: A
Saved
Saved
R
GRAFIK Eye
QS System Installation and Operation Guide 17
®
Master
buttons
OK
OK
button