General Functionality: Programming Mode - Lutron GRAFIK Eye QS Serie Manual De Montaje Y Utilización

General Functionality: Programming Mode

Entering and Exiting Programming Mode
To enter programming mode:
Main menu
Press and hold simultaneously the top and
Timeclock
bottom buttons on the lighting column for 3
seconds.The LEDs in the lighting buttons
Scene setup
will scroll from top to bottom, confirming
that you are in programming mode, and the
Info screen display
when you enter
info screen will display the main menu.
programming mode
To exit programming mode:
Scene 1
Press and hold simultaneously the top and
bottom buttons on the lighting column for
Fade time
3 seconds. The info screen will go to
3 seconds
Scene 1.
Info screen display
when you exit
programming mode
Navigating Menus in Programming Mode
Master Buttons
The master buttons allow you to move through the menu
choices. The current choice is highlighted on the info screen.
OK Button
The OK button chooses the current highlighted menu choice.
This will either take you to the next menu or accept a setting you
have selected.
Timeclock Button
The timeclock button functions as a "back" button during
programming mode. Pressing the timeclock button takes you
back one step in the current menu. Pressing it repeatedly will
eventually return you to the main menu, but will not exit
programming mode.
R
OK
GRAFIK Eye QS System Installation and Operation Guide 12
®
Master buttons
OK button
Timeclock button
Press and hold the top and
bottom buttons for 3 seconds
to enter or exit programming
mode