Lutron GRAFIK Eye QS Serie Manual De Montaje Y Utilización página 14

Zone Button Operation
Name a Zone
1. Enter programming mode (see page 12).
Main menu
2. Use the master buttons to highlight "Zone setup"
and press the OK button to accept.
Occ sensor
Zone setup Scene setup
3. Use the master buttons to highlight "Label" and
press the OK button to accept.
4. Use the master buttons to change the zone
Zone setup
number to your desired zone. Custom zone labels
will appear if previously set. Press the OK button
Min level
to accept.
Label
5. Use the master buttons to highlight "Custom" and
press the OK button to accept. Or, highlight
"Default" to return the zone label to the default
Select zone:
(e.g., Zone 1).
Zone 2 6. Use the master buttons to scroll through the
characters (lowercase and uppercase letters, plus
numbers 0-9). The character you are currently
changing will be underlined on the screen. Press
Label zone 2
OK to select the character you want, then repeat
for all available characters. Choose a space (no
Custom
character) and press OK for any remaining
characters. Press the OK button to accept.
Note: Custom zone labels will always begin with
the zone number and a colon (e.g., 1: Uplights).
Label zone 2
7. The info screen will display a confirmation screen
that your name has been saved.
1 / 12
A
8. Exit programming mode (see page 12).
1: A
Saved
Saved
R
GRAFIK Eye QS System Installation and Operation Guide 14
®
Master
buttons
OK
OK
button