Setting Oven Controls; To Set Or Change Temperature For Normal Baking; To Set Control For Continuous Bake Or 12 Hour Energy Saving; To Set Control For Oven Lockout - Sears Kenmore 790.4710 Serie Manual De Uso Y Cuidado

Setting Oven
Controls
FEATURE OVERVIEW
• To Set or Change
Temperature for Normal
Baking
NOTE: The oven function
will not work if the time of
day clock is not set.
To Set or Change the Temperature for Normal Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F (65°C to 287°C).
Note: The oven control has a built-in safety feature that will shut off the oven if the control is left on for more than 11 hours 59 minutes.
To Set the Controls for Normal Baking:
1. Push BAKE pad ."— — —" appears in the display.
2. Within 5 seconds, push the UP
or DOWN ARROW pad
3. As soon as the UP
When the displayed temperature reaches the desired baking temperature, the control will beep 3 times.
4. To cancel the baking function, push the STOP CLEAR pad
To Change the Oven Temperature after Baking has Started:
1. If you are using the minute timer, push the BAKE pad
2. Push the UP or DOWN ARROW pad

To Set Control for Continuous Bake or 12 Hour Energy Saving:

The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than
11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
To set control for continuous baking:
1. Push TIMER SET/OFF pad
2. Push and hold TIMER SET/OFF pad
continuous cooking. The current time of day will return to the display.
3. To cancel the Continuous Bake Function, push TIMER SET/OFF pad
"12hr" will appear in display indicating that the control has returned to the 12 Hour Energy Saving feature.

To Set Control for Oven Lockout:

The control can be progammed to lock the oven door and inactivate the oven controls.
To Set Control for Oven Lockout feature:
1. Push the STOP CLEAR pad
will flash and the motor driven door lock will begin to close automatically. DO NOT open oven door while the indicator
light is flashing. Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day
will appear in the display.
2. To cancel the lockout feature, push STOP CLEAR pad
and resume normal operation.
Note: If any control pad is pressed while the Oven Door/Control Lockout mode, "Loc" will appear in the display
until the control pad is released.
Note: The oven function will not work if the time of day clock is not set.
or DOWN ARROW pad
, the temperature can then be adjusted in 5°F (1°C) increments.
or DOWN ARROW pad
to increase or decrease the set temperature.
, "0:00" will appear in the display.
down for 5 seconds until tone is heard, "— — hr" will appear in display for
and hold for 3 seconds. "Loc" will appear in display, the "Door Locked" indicator ligth
. The display will show "350°F (177°C)." By holding the UP
is released, the oven will begin heating to the selected temperature.
.
and make sure the bake temperature is displayed.
and hold for 5 seconds until tone is heard.
and hold for 3 seconds. The control will unlock the oven door
15