Connect Ductwork - Broan Best K3139 Manual De Instrucciones

CONNECT DUCTWORK

Ducted Configuration
Adjust the width of the flue mounting bracket to
equal the inside width of decorative flue. Insert
and tighten mounting screws to hold bracket
width.
Use mounting screws and drywall anchors to
secure flue mounting bracket to the ceiling as
shown.
1. Use 6" round metal duct to connect the
duct collar on the hood to the ductwork
above.
2. Use duct tape to make all joints secure and
air tight.
3. Insert the decorative flues setting them on
the hood.
4. Extend the upper flue to the ceiling and
secure with the mounting screws.
DECORATIVE
FLUE
DUCT TAPE
6" ROUND
METAL DUCT
- 7 -
FLUE MOUNTING
BRACKET
MOUNTING SCREWS
MOUNTING SCREWS
=
=
FASTEN FLUE TO UPPER BRACKET
WITH MOUNTING SCREWS