Cleaning The Lcd Screen And Interior; Specifications - Sony CBK-VF01 Manual De Instrucciones

Cleaning the LCD Screen
and Interior
When cleaning the LCD screen or interior of the
viewfinder, detach the viewfinder from the
camera, detach the viewfinder barrel from the
body, and take care not to damage the
components.
For details on how to detach the viewfinder, see
"Attaching the Viewfinder to a Camera" (page 18).
For details on how to detach the viewfinder barrel,
see "Detaching the viewfinder barrel" (page 21).
To remove dust from the screen
Use a dust blower.
Note
Do not use solvents such as thinner.
After using the viewfinder in harsh environments
Check the following points after using the
viewfinder in a harsh environment such as a
beach, a dusty area, or a hot spring resort.
• Use an airbrush to carefully remove any dust or
sand from inside the viewfinder.
• Clean the contacts of the connector.
• Check that the viewfinder is working correctly.
22
Cleaning the LCD Screen and Interior / Specifications

Specifications

General
Power supply
10.5 to 17.0 V DC (supplied by the camera)
Power consumption
2 W
Operating temperature
0 ºC to 40 ºC (32 ºF to 104 ºF)
Storage temperature
–20 ºC to +60 ºC (–4 ºF to +140 ºF)
Mass
Approx. 680 g (1 lb 8.0 oz)
External dimensions
103
1
(4 / )
8
255 (10
60
3
(2 / )
8
LCD
3.5-inch color TFT transflective LCD
Image display area dimensions
1
76.8 × 43.2 mm (3 /
8
(H/V, 16:9 aspect ratio)
Unit: mm (inches)
201
(8)
1
/ )
8
89
5
(3 / )
8
3
× 1 / inches)
4