Bremont ARGONAUT Manual Del Usuario página 7

ARGONAUT
AUTOMATIC CHRONOMETER
Your Bremont watch shows you the time in hours, minutes and seconds,
and the date. The mechanical movement with automatic winding has a
free-swinging rotor that keeps the mainspring wound via the motion of
your wrist. The movement in your Argonaut has 25 jewels, runs at 28,800
bph and has a 42-hour power reserve once fully wound. The watch is
water resistant to 300m (30ATM) and the dial is protected by a dual anti-
reflective sapphire crystal that is retained securely in the case.
To ensure that this rather special watch continues to run beautifully for
years to come you must follow a few important operating instructions...
WINDING THE WATCH
Your watch has a screw-in crown. The purpose of the screw-in crown is
to protect the watch from penetrating water and to avoid unintentional
adjustment of the time or date. To unscrew the crown, rotate the crown
in an anti-clockwise direction where it will automatically assume position
I. This position is also the winding position for the watch, where you can
manually wind the watch by hand. The movement will automatically start
with just a few revolutions of the rotor, however it is better to wind the
movement fully with 65 revolutions of the crown. By doing this you will