Setting The Time - Bremont ARGONAUT Manual Del Usuario

achieve maximum accuracy and have a power reserve of 42-hours, even
when the watch is not on your wrist.
SETTING THE DATE AND DAY
You can adjust the date by pulling out the crown to position II. You will
now be able to change the date by rotating the crown anti-clockwise.
Do not change the date between 20:00 and 03:00
For models which feature the day, you can adjust from this crown position by
rotating it anti-clockwise.

SETTING THE TIME

Pull the crown out to position III, this will stop the movement, you can
now position the minute hand exactly. To start the second hand, push the
crown back to position I. When setting the time, it is worth noting that
the date change always takes place at mid-night (00:00). If this change has
already taken place at 12:00 noon, you must move the hands forward by
12 hours. Ensure that the crown is screwed back in after setting the watch.
This can be achieved by gently pressing the crown down whilst rotating it
in a clockwise direction.