Connecting A Vcr Or Similar Device - Sony DAR-X1R Manual De Instrucciones

Connecting a VCR or Similar Device

After disconnecting the recorder's mains lead from the mains, connect a VCR or similar recording device
to the LINE 2 IN jacks or LINE 3/DECODER jack of this recorder.
Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack) (page 104).
For details, refer to the instruction manual supplied with the connected equipment.
To record on this recorder, see "Recording from connected equipment without a timer" on page 74.
VCR
SCART cord (not supplied)
i
to LINE 3/DECODER
DVD recorder
to LINE 2 IN
Audio/video cord (not supplied)
VCR, etc.
: Signal flow
GB
38