Yamaha VMX17 Manual De Montaje página 7

Check the following items again after setup and predelivery service have been completed.
A: INSTALLATION OF THE PARTS INCLUDED IN THE CRATE
□ FRONT WHEEL
□ FRONT FENDER
B: TIGHTENING TORQUE OF EACH PART
□ Front wheel axle bolt
□ Front wheel axle pinch bolt
□ Front brake caliper bolt
□ Bolt (front wheel sensor lead holder)
□ Front wheel sensor bolt
□ Bolt (front fender stay)
□ Bolt (front fork guard)
□ Bolt (front brake hose holder)
□ Bolt (front brake hose clamp)
□ Bolt (battery cover)
□ Bolt (top cover)
□ Bolt (top cover)
□ Bolt (multi-function display cover)
□ Bolt (rider seat)
C: ROUTING OF WIRE, CABLES, ETC.
□ Front wheel sensor lead
□ Positive battery lead
D: ADJUSTMENTS
□ CHECKING AND CHARGING THE BATTERY
□ MEASURING THE TIRE PRESSURE
□ CHECKING THE ENGINE OIL LEVEL
□ CHECKING THE FINAL GEAR OIL LEVEL
□ CHECKING THE COOLANT LEVEL
□ ADJUSTING THE THROTTLE CABLE FREE PLAY
□ ADJUSTING THE FRONT BRAKE
□ ADJUSTING THE REAR BRAKE LIGHT SWITCH
□ CHECKING THE BRAKE FLUID LEVEL
E: FUNCTION AND PERFORMANCE
□ Check the function of the headlight, meter light and taillight
□ Check the function of the brake light
□ Check the function of the turn signal lights and indicator lights
□ Check the tone quality of the horn
F: ACCESSORIES, ETC. FOR DELIVERY
□ Owner's manual
□ Owner's tool kit
SETUP AND PREDELIVERY CHECKLIST
VMX17(Y) 2009
□ REAR VIEW MIRRORS
□ BATTERY
81 Nm (8.1 m•kg, 59 ft•lb)
21 Nm (2.1 m•kg, 15 ft•lb)
35 Nm (3.5 m•kg, 25 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
3 Nm (0.3 m•kg, 2.2 ft•lb)
1.5 Nm (0.15 m•kg, 1.1 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)
□ Front brake hose
□ Negative battery lead
□ BLEEDING THE HYDRAULIC BRAKE SYSTEM
□ ADJUSTING THE CLUTCH LEVER
□ CHECKING THE CLUTCH FLUID LEVEL
□ BLEEDING THE HYDRAULIC CLUTCH SYSTEM
□ ADJUSTING THE FRONT FORK LEGS
□ ADJUSTING THE REAR SHOCK ABSORBER ASSEMBLY
□ ADJUSTING THE HEADLIGHT BEAM
□ ADJUSTING THE DIGITAL CLOCK
□ Check the function of the indicator on the speedometer
□ Check the feel of the brakes
□ Check engine for irregular noise (Yes/No)
□ Check for exhaust leak (Yes/No)
□ Key holder
-4-