Replacing The Top Burner Pilot Light Nozzle; Replacing Oven Burner Pilot Light Nozzle - Angelo Po 1G1FA0GV Manual De Uso E Instalación

REPLACING THE TOP BURNER PILOT LIGHT NOZZLE

To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob (A).
3 - Undo the screws (C) and remove the control
panel (B).
4 - Remove the pipe (D).

REPLACING OVEN BURNER PILOT LIGHT NOZZLE

To carry out this operation, proceed as follows.
1 - Access the pilot light through the opening pro-
vided in the bottom of the appliance.
2 - Unscrew the cap (B).
3 - Remove the nozzle (C) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
4 - Replace the cap (B).
B
A
5 - Remove the nozzle (E) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
6 - Replace the pipe (D), the control panel (B) and
the control knobs (A).
D
C
- 25 -
E
10
IDM-39618301700.tif
C
B
IDM-39603614900.tif
IT
GB
DE
FR
ES
English