Switching The Top Burner On And Off; Switching The Oven On And Off - Angelo Po 1G1FA0GV Manual De Uso E Instalación

SWITCHING THE TOP BURNER ON AND OFF

Lighting
1 - Turn on the gas supply tap.
2 - Press the knob (A) and turn it anti-clockwise
(pos. 1) to light the pilot light.
3 - Keep the knob pressed for about 15 sec. to
prime the thermocouple.
4 - Turn the knob anti-clockwise (pos. 2) to light the
burner.
5 - Turn the knob gradually anti-clockwise to adjust
the power of the flame down to the minimum
setting.
Turning off
1 - Turn the knob clockwise (pos. 3) to turn the
burner off. The pilot light will remain on to allow
the burner to be re-lit.
2 - Turn the knob clockwise (pos. 4) to turn off the
pilot light.
3 - Turn off the knob to ensure safety.

SWITCHING THE OVEN ON AND OFF

Lighting
Important
At first switch-on, preheat as appropriate.
1 - Turn on the gas supply tap.
2 - Press the knob (A) and turn it anti-clockwise
(pos. 1) while at the same time pressing the pi-
ezoelectric ignition knob (B) repeatedly to light
the pilot light.
3 - Keep the knob pressed for about 15 sec. to
prime the thermocouple.
The pilot light can also be lit by hand through
the hatch (C).
4 - Turn the knob anti-clockwise (pos. 2) to be-
tween the minimum and maximum temperature
and wait for the warm-up time before using the
oven (see table)
Temperature°C 100 140 175 210 240 270 300 >300
Time in minutes 6' 8' 10' 12' 14' 16' 18' 20'
A
B
4
- 11 -
1
4
IDM-396118600400.tif
A
C
1
2
3
IDM-39618600500.tif
2
3
IT
GB
DE
FR
ES
English