Input Wiring Specifications - ESAB Cutmaster 120 Manual Del Usuario

2.05 Input Wiring Specifications
ESAB Cutmaster 120 Power Supply Input Cable Wiring Requirements
Input voltage
Volts
3 Phase 400
Line Voltages with Suggested Circuit Protection and Wire Sizes
Based on National Electric Code and Canadian Electric Code
NOTE!
Refer to Local and National Codes or local authority having jurisdiction for proper wiring
requirements.
The suggested sizes are based on flexible power cable with power plug installations. For
hard-wired installations refer to local or national codes.
I 1 max is taken at TDC rated minimum duty cycle.
I 1 eff is taken at TDC 100% rated duty cycle.
300X5398
All manuals and user guides at all-guides.com
Freq Power Input
Hz kVA I max
50 23.6 34
INTRODUCTION
ESAB CUTMASTER 120
Suggested Sizes
Fuse Flexible Cord
I eff
(amps) (Min. AWG)
31 40 8
Flexible Cord
(Min. mm )
2
10
2-3