Operating And Display Elements; Displayed Symbols; Control Panel Keys - Intra-Lock INTRA-SPIN Manual

EN
14

Operating and display elements

RPM
>RCF<
RPM/RCF
14.1

Displayed symbols

Lid unlocked.
Lid locked.
Rotation display. The rotation display lights up, rotating counterclockwise, as long as the rotor is turning.
14.2

Control panel keys

RPM/RCF
• Input the speed directly.
If the key is kept pressed, the value changes with increasing speed.
t
• Input the runtime directly.
Adjustable in steps of 1 second up to a minute, and in steps of 1 minute starting from 1 minute.
• Input the centrifuging parameters.
If the key is kept pressed, the value changes with increasing speed.
• Selection key for activating the individual parameters.
SELECT
Every time the key is pressed, the next parameter is activated.
• Call up the "MACHINE MENU" (keep the key pressed for 8 seconds).
• In the "Machine Menu", select the menus "
• Scroll forward in the menus.
• Switching between the RPM display (RPM) and RCF display ( RCF ).
RCF
RCF values are displayed in parentheses
RPM Speed
RCF : Relative centrifugal acceleration
• Start the centrifugation run.
START
PULSE
• Short-term centrifugation.
Centrifugation is run as long as the key is kept pressed.
• Call up the menus "
• Finish the centrifugation run.
STOP
OPEN
The rotor runs down with a pre-selected brake stage.
Pressing the key twice triggers the Emergency Stop.
• Unlock the lid.
12/446
t/min:s
START
RCF
PULSE
t
STOP
SELECT
OPEN
Info", " Settings" and "
Info", " Settings" and "
.
Time & Cycles".
Time & Cycles".