Terms And Conditions Of Warranty And Disposal; Fronius Manufacturer's Warranty; Disclaimer; Disposal - Fronius Primo 208-240 Serie Manual De Instrucciones

Terms and conditions of warranty and disposal

Fronius manu- Detailed warranty conditions specific to your country can be found online:
facturer's war- www.fronius.com/solar/garantie
ranty
To take advantage of the full warranty duration for your newly installed Fronius
inverter or storage system, register your product at: www.solarweb.com.

Disclaimer

Damages claims against Fronius are excluded unless they are based on gross
negligence or willful intent on the part of Fronius.
The installer and the operator shall comply with the safety rules given by Fronius
and regional applicable guidelines, standards, and regulations in connection with
work on photovoltaic systems. The safety rules can be found in the operating in-
structions provided upon delivery. The installer as well as the operator are fully
liable for damages and costs which arise due to noncompliance of this provision.
This Fronius product has an internal Arc Fault Circuit Interrupter (AFCI) Type 1.
This component detects and separates serial arcs in your PV system, thus meet-
ing the requirements of standard UL1699B Outline of Investigation for Photovol-
taic (PV) DC Arc Fault Circuit Protection (Issue Number 2, January 14, 2013). In
addition, Fronius accepts no liability for damages that may result from the occur-
rence of arcs. Claims against Fronius due to reduced yield or yield loss during the
time the inverter is shut down by the AFCI are excluded. Costs that may arise
due to inverter being shut down by the AFCI shall be borne by the operator.

Disposal

Waste electrical and electronic equipment must be collected separately and re-
cycled in an environmentally sound manner in accordance with the European Dir-
ective and national law. Used equipment must be returned to the distributor or
through a local authorized collection and disposal system. Proper disposal of the
used device promotes sustainable recycling of material resources. A failure to
observe this may lead to potential health/environmental impacts
50